PWS / Drilling

Get the holes you need positioned around your assembly or fabrication plan.

Through-hole or blind-hole drilling in accepted metal sections, components, sheet or plate, based on the specified hole sizes, depths, quantities and positions.

What to provide

Material grade, profile and thickness.
Hole diameters, depths and quantities.
A dimensioned hole layout and clear reference edges.
Whether holes are through, blind, countersunk or require another operation.

How pricing is established

Setup and marking, handling, material and thickness, hole diameter and depth, quantity, access and any countersinking or additional operation.

The quotation confirms the job charge and any minimum, additional operations, material, consumables or transport included.

Confirm the arrangements

PWS reviews equipment availability, accepted material, tooling, dimensions, requirements and timing before accepting the job.

After the scope and price are agreed, PWS can issue a payment link for the approved service order.

REQUEST DRILLING

Upload your hole layout drawing or dimensioned sketch.

Upload a drawing, PDF or a clear photo of a dimensioned hand sketch. Label each different part or size and its quantity. Show hole diameters, hole quantities and positions measured from clear reference edges, with units. Include the part outlines, hole centres and distances from reference edges. For drilling, identify through or blind holes and any required depths. PWS can redraw your sketch and carry out the calculations needed for the quotation.

Measurement units (all dimensions)

The selected unit applies to every length dimension in this form. Changing units converts entered numeric dimensions. Quantities stay as counts and angles stay in degrees. Label units on uploaded drawings and in free-text notes; these files and notes are not rescaled.

Material *Material grade (if known)Material thickness (mm) *Material or parts supply

Hole sizes and quantities

Use one row per hole size and type on a part. Repeat the same part mark and part quantity when that part has another hole size. Use a different part mark for a different design. Hole locations belong on the uploaded drawing.

Example: 15 plates with four holes of one size each = 60 holes. If each plate also needs two holes of another size, add another row with the same part mark, 15 parts and 2 holes per part.

Drilling can produce through-holes or blind holes. For blind holes, enter the required depth and define the depth reference on the drawing. Put countersinking, counterboring or other finishing details on the drawing and in the notes.

How are the holes listed?

Hole group 1

Part mark / drawing reference *Number of these parts *Hole diameter (mm) *Holes of this size per part *Hole type

For a long or mixed-thickness job, upload a complete labelled schedule showing each part, material thickness, part quantity, hole sizes and holes per part.

Preferred timing

Use the job notes for part marks / drawing references, mixed materials or thicknesses, tolerances, finishing, priorities and extra instructions. Put each part quantity and the hole layout on the drawing or sketch so different jobs and hole sizes are clear.

Job requirements / notes *Hole layout drawing or dimensioned sketch *Job / collection location *Your name *Your email *Telephone / WhatsApp

A hole layout drawing or dimensioned sketch is required. Attach up to 3 JPG, PNG, WebP or PDF files, 5 MB each. Attachments are emailed to PWS and are not published on the website.

Preparing secure form…

Need another operation as well?

Include the full drawing or processing sequence in your request. PWS can review a combined scope rather than treating each operation as an unrelated job.

Explore processing services All PWS services

Loading views...