A clean fit-up begins at the saw. If you regularly cut box section for gate frames, round tube for railings or bar for brackets, the G4017 gives your shop a dedicated station for getting parts ready to tack.
The floor-standing G4017 Metal-Cutting Mitre Bandsaw pairs a swivelling saw head with a handwheel vise. Set the head to the required angle, clamp the stock and make the cut. The swivel is especially useful when long material is already resting on stock supports.
What can the G4017 cut?
| Mitre setting | Round stock | Rectangular stock |
|---|---|---|
| 0° | Ø170 mm | 210 × 140 mm |
| 45° | Ø120 mm | Confirm with PWS |
| 60° | Ø70 mm | Confirm with PWS |
The straight-cut capacity gives you room for a range of workshop sections. Capacity changes as the head swivels, so include your largest piece and steepest angle when you request a quote.
Where it fits in the shop
Use the G4017 to prepare straight frame members, mitred corners, posts and short pieces for assemblies. For repeat parts, plan your stock supports and length stop before the first cut. Matching the blade pitch to the material and wall thickness helps you get a cut suitable for your next fabrication step.
The supplier lists a 20 × 0.9 mm blade section and 40 and 80 m/min blade speeds for the two-speed configuration. PWS can confirm the exact blade length, electrical configuration and freight details for your order.
Get a quote for your workshop
Send PWS your largest stock size, material type, cut angles, available power and delivery location. We’ll use those details to confirm the configuration and quote the machine and shipping.
View the G4017 and request a quote
