When a job calls for wide box section and mitres in both directions, check the saw’s capacity at each angle before you buy. The G4020 Metal-Cutting Mitre Bandsaw is a floor-standing option for fabrication and maintenance shops that regularly prepare tube, bar and profiles.
The G4020 features a 1.1 kW motor, a handwheel vise and a swivelling head with straight, +45° and −45° settings. Opposing mitres are useful when cutting complementary parts for frames, braces and other assemblies.
Size the saw to your stock
| Mitre setting | Rectangular capacity |
|---|---|
| 0° | 235 × 205 mm |
| +45° | 135 × 125 mm |
| −45° | Confirm for your profile |
The straight-cut capacity of 235 × 205 mm gives you a starting point for comparing the saw with your wider sections. If your work involves reverse mitres or large round stock, send PWS the profile and orientation you intend to cut so we can confirm fit.
Set up for the work you actually do
The supplier lists 24, 41, 61 and 82 m/min blade speeds and a single-phase, 50 Hz configuration. Blade selection and speed depend on the stock and the blade manufacturer’s guidance. Before ordering, check your available voltage and frequency, the space for infeed and outfeed supports, and how you’ll receive the machine.
Share your material sizes, typical cut angles and delivery destination with Progressive Welding Solutions. We’ll confirm the electrical configuration, replacement blade dimensions, machine price and freight in the quotation.
View the G4020 and request a quote
